Domestic Fibreglass

All Ampelite Fibreglass sheeting is Australian made. The domestic fibreglass sheeting is available in corrugated and the 5-rib (Trimdek) profiles.

There are so many ways to use Ampelite Corri-glas and Trim-glas and, the cost is moderate, so it’s good value too.  If you want plenty of light, lasting protection from the sun, and a great home feature – start by drawing up a simple plan. Ampelite sheeting is lightweight, easy to handle and easy to install.  Even projects such as an outdoor living area or carport can be a satisfying do-it-yourself job. Before you order materials or commence to build you should check that your proposed work complies with local council by-laws.  Minimum recommended roof pitch is 5º.

Corrugated sheets should have 1.5 overlaps and 5 Rib sheets 1 overlap.  Overlaps should face away from prevailing wind. Always pre-drill the sheets with a drill 2mm larger than the fixing screw to allow for sheet movement due to expansion and contraction of the material. All compliment accessories including profiled end closure strips, screws and tapes are readily available. Domestic Fibreglass features a limited 5 year warranty. For full warranty details, please contact your nearest Ampelite office.